fbpx

During the primary fermentation, the yeast cells feed on the sugars in the must and multiply, producing carbon dioxide gas and alcohol. The temperature during the fermentation affects both the taste of the end product, as well as the speed of the fermentation. For red wines, the temperature is typically 22 to 25 °C, and for white wines 15 to 18 °C. For every gram of sugar that is converted, about half a gram of alcohol is produced, so to achieve a 12% alcohol concentration, the must should contain about 24% sugars. The sugar percentage of the must is calculated from the measured density, the must weight, with the help of a specialized type of hydrometer called a saccharometer. If the sugar content of the grapes is too low to obtain the desired alcohol percentage, sugar can be added (chaptalization). In commercial winemaking, chaptalization is subject to local regulations. Alcohol of more than 12% can be achieved by using yeast that can withstand high alcohol. Some yeasts can produce 18% alcohol in the wine however extra sugar is added to produce a high alcohol content. During or after the alcoholic fermentation, a secondary, or malolactic fermentation can also take place, during which specific strains of bacteria (lactobacter) convert malic acid into the milder lactic acid. This fermentation is often initiated by inoculation with desired bacteria.

Pressing is the act of applying pressure to grapes or pomace in order to separate juice or wine from grapes and grape skins. Pressing is not always a necessary act in winemaking; if grapes are crushed there is a considerable amount of juice immediately liberated (called free-run juice) that can be used for vinification. Typically this free-run juice is of a higher quality than the press juice.

However, most wineries do use presses in order to increase their production (gallons) per ton, as pressed juice can represent between 15%-30% of the total juice volume from the grape. Presses act by positioning the grape skins or whole grape clusters between a rigid surface and a moveable surface and slowly decrease the volume between the two surfaces. Modern presses dictate the duration and pressure at each press cycle, usually ramping from 0 Bar to 2.0 Bar. Sometimes winemakers choose pressures which separate the streams of pressed juice, called making “press cuts.” As the pressure increases the amount of tannin extracted from the skins into the juice increases, often rendering the pressed juice excessively tannic or harsh. Because of the location of grape juice constituents in the berry (water and acid are found primarily in the mesocarp or pulp, whereas tannins are found primarily in the exocarp, or skin, and seeds), pressed juice or wine tends to be lower in acidity with a higher pH than the free-run juice.

Autore

info@lacombarbia.it

Articoli correlati

Your Favourite Place

[trx_title type="1" align="center" bottom="30"]Lovely Atmosphere[/trx_title][trx_block align="center" dedicated="no" scroll="no" dir="horizontal" bottom="50" style="text-align: center;"]I went on this trip with the intent of finding more...

Leggere tutti

About Us

We are a small family winery adhering to principles of quality wine making. We firmly believe that the wine we make is...

Leggere tutti

Night and day in Vineyard

Preparations for harvest begin as the end of summer approaches. Pay close attention if you visit in August and you see the...

Leggere tutti

In Vino Veritas

There’s no better feeling than uncorking a bottle of Chardonnay at the end of the day or sipping a Bordeaux that perfectly...

Leggere tutti

Welcome To Our Restaurant

The aging of wine is potentially able to improve the quality of wine. This distinguishes wine from most other consumable goods. While...

Leggere tutti

Does Wine Age Matter?

If you read wine labels, one of the terms you’re bound to come across eventually is old vines. The implication, of course,...

Leggere tutti
English